Electronic Series
lumbar support mechanisms
+ new high-torqued reduction motor
EL-182-S4WAY
Back Panel:
Nylon PA6, Small (160*152 mm) with PP black board.
* PP black board is better fixed on metal frame chair.
Lumbar Moving Range:
In / Out, 25 mm; Up / Down, 35 mm
Available in 12 & 24 Voltage.
High-Torque Reduction Motor with Ball Bearings
– high-torqued reduction motor with a motor-gear reducer combination
– one controls lumbar movement: In & Out.
– the other controls lumbar movement: Up & Down.
Cable Length: 500/400/560 MM or Customizable
Product Applications: vehicle seats, public transportations, industrial vehicle seats, gaming chairs.
lifetime-tested
lumbar support mechanisms
EL-501-H
Back Panel:
Nylon PA6, Large (262*242mm) with metal frame
Lumbar Moving Range:
In / Out, 28 mm
Available in 12V & 24V.
High-Torque Reduction Motor with Ball Bearings
– high-torqued reduction motor with a motor-gear reducer combination
Cable Length: 630/765 mm or Customizable
EL-608-S
Back Panel:
Nylon PA6, Small (160*152mm)
with 27 degree slope design supporting board.
Lumbar Moving Range:
In / Out, 30 mm; Highest, 60 mm.
Available in 12V or24V.
High-Torque Reduction Motor with Ball Bearings
– high-torqued reduction motor with a motor-gear reducer combination
Cable Length: 400 mm or Customizable
EL-608-SS
Back Panel:
Nylon PA6, Small (160*152mm)
with 27 degree slope design supporting board.
Lumbar Moving Range:
In / Out, 30 mm; Highest, 60 mm.
Available in 12V or24V.
High-Torque Reduction Motor with Ball Bearings
– high-torqued reduction motor with a motor-gear reducer combination
Cable Length: 400 mm or Customizable
EL-608-H
Back Panel:
Nylon PA6, Large (262*242mm)
Supported Plastic Board: with a 27-degree slope design.
Lumbar Moving Range:
In / Out, 45 mm; Highest, 80 mm.
Available in 12V & 24V.
High-Torque Reduction Motor with Ball Bearings
– high-torqued reduction motor with a motor-gear reducer combination
Cable Length: 400 mm or Customizable
EL-608T-H
Back Panel:
Nylon PA6, Large (262*242mm)
Supported Plastic Board: with a 40-degree slope design.
Lumbar Moving Range:
In / Out, 48 mm; Highest, 87.5 mm
Available in 12V & 24V.
High-Torque Reduction Motor with Ball Bearings
– high-torqued reduction motor with a motor-gear reducer combination
Cable Length: 400 mm or Customizable Length
EL-H
Back Panel:
Nylon PA6, Large (262*242mm)
Lumbar Moving Range:
In / Out, 28 mm
Available in 12V & 24V.
High-Torque Reduction Motor with Ball Bearings
– high-torqued reduction motor with a motor-gear reducer combination
Cable Length: 400 mm or Customizable Length
EL-S
Back Panel:
Nylon PA6, Small (160*152 mm)
Lumbar Moving Range:
In / Out, 25 mm
Available in 12V & 24V.
High-Torque Reduction Motor with Ball Bearings
– high-torqued reduction motor with a motor-gear reducer combination
Cable Length: 1000 mm or Customizable Length
Copyright© SpineRelaxer 2001
