Manual Instruction
Lumbar Support Mechanism
- CH-901-HS
- CH-906-S
- CH-H 2IN1
- CH-SS 2IN1
CH-901-HS 2 in 1 (One Actuator for Headrest & Lumbar adjustment)
ADJUSTABLE LUMBAR SUPPORT
OPERATION:
USING THE LUMBAR SUPPORT
- 1.Turn the knob on the side clockwise or counterclockwise until reaching your desired position.
- 2.Pull the knob-Slightly adjust UP or DOWN for height adjustment.(Fig.1)
- 3.Push the knob-Slightly adjust IN or OUT for curve adjustment.(Fig.2)
CH-906-S 2 in 1 (One Actuator for Lumbar & Sideway adjustments)
ADJUSTABLE LUMBAR SUPPORT
OPERATION:
USING THE LUMBAR SUPPORT
- 1.Turn the knob on the side clockwise or counterclockwise until reaching your desired position.
- 2.Pull the knob-Slightly adjust UP or DOWN for height adjustment.(Fig.1)
- 3.Push the knob-Slightly adjust IN or OUT for curve adjustment.(Fig.2)
CH-H 2IN1 2 in 1 (One Actuator for 4-way adjustments)
ADJUSTABLE LUMBAR SUPPORT
OPERATION:
USING THE LUMBAR SUPPORT
- 1.Turn the knob on the side clockwise or counterclockwise until reaching your desired position.
- 2.Pull the knob-Slightly adjust UP or DOWN for height adjustment.(Fig.1)
- 3.Push the knob-Slightly adjust IN or OUT for curve adjustment.(Fig.2)
CH–SS 2IN1 2 in 1 (One Actuator for 4-way adjustments)
ADJUSTABLE LUMBAR SUPPORT
OPERATION:
USING THE LUMBAR SUPPORT
- 1.Turn the knob on the side clockwise or counterclockwise until reaching your desired position.
- 2.Pull the knob-Slightly adjust UP or DOWN for height adjustment.(Fig.1)
- 3.Push the knob-Slightly adjust IN or OUT for curve adjustment.(Fig.2)
Lumbar Support Cushion
- RS-182
- RS-380
- RS-801
RS-182 (4WAY : 2-in-1 knob)
ADJUSTABLE LUMBAR SUPPORT
OPERATION:
USING THE LUMBAR SUPPORT
- Place the cushion on your chair (Fig.1).
- Buckle up until your hear the “click”(Fig.2)
- Tighten the strap (Fig.3)
- Turn the knob on the side clockwise or counterclockwise until reaching your position.
- Pull up to the tenon-Adjust upward or downward(Height)(Fig.4)
- Push the knob-Slightly adjust outward or inward (Arch)(Fig.5)
RS-380
ADJUSTABLE LUMBAR SUPPORT
OPERATION:
USING THE LUMBAR SUPPORT
- Encircle the headrest with Strap A and secure it.(Fig.1).
- Place RS-380 on Strap A for your neck support.(Fig.2)
- Secure Strap B on Strap A. (Fig.3)
- Place RS-380 on the Strap B for lumbar support.(Fig.4)
- After sitting up, we suggest that you tilt angle of backrest 105-115 degree for ultimate comfort.(Fig.5)
- Turn the knob on the side clockwise or counterclockwise until reaching your desired position.
RS-801
ADJUSTABLE LUMBAR SUPPORT
OPERATION:
USING THE LUMBAR SUPPORT
- Place the cushion on your any chairs to the height of your lower back. (Fig.1)
- Buckle up until you hear the “click”. (Fig.2)
- Tighten the strap. (Fig.3)
- Turn the knob on the side clockwise or counterclockwise until reaching your desired support. (Fig.4)
